WARNING! Access to this system is limited to authorised users only.
Unauthorised users may be subject to prosecution.
Unauthorised access to this system is a criminal offence under Australian law (Federal Crimes Act 1914 Part VIA)
It is a criminal offence to:
(1) Obtain access to data without authority. -Penalty 2 years imprisonment.
(2) Damage, delete, alter or insert data without authority. -Penalty 10 years imprisonment.
User activity is monitored and recorded. Anyone using this system expressly consents to such monitoring and recording.

To protect your data, the CISO officer has suggested users to enable 2FA as soon as possible.
Currently 2.7% of users enabled 2FA.

Commit a0dcf892 authored by kyle's avatar kyle
Browse files

add jackal conf

parent 6e5b73aa
; /etc/ptpd.conf
; ==============================================================================
; This is a recommended configuration for a PTPv2 slave
; For a full list of options run ptpd2 -H or see the documentation and man pages
; ==============================================================================
; interface has to be specified
ptpengine:interface=wlp2s0
;ptpengine:interface=eth0
; PTP domain
ptpengine:domain=42
; available presets are slaveonly, masteronly and masterslave (full IEEE 1588 implementation)
ptpengine:preset=slaveonly
; multicast for both sync and delay requests - use hybrid for unicast delay requests
ptpengine:ip_mode=multicast
; when enabled, instead of sockets, libpcap is used to receive (sniff) and send (inject) packets.
; on low latency hardware such as 10GE NICs this can provide results close to hardware-assisted PTP
ptpengine:use_libpcap=n
; uncomment this to enable outlier filters
;ptpengine:sync_outlier_filter_enable=y
;ptpengine:delay_outlier_filter_enable=y
; store observed drift in a file
clock:drift_handling=file
; update online statistics every 5 seconds
;global:statistics_update_interval=30
; wait 5 statistics intervals for one-way delay to stabilise
;ptpengine:calibration_delay=5
; log file, event log only. if timing statistics are needed, see statistics_file
global:log_file=/var/log/ptpd2.log
; log file up to 5M
global:log_file_max_size=5000
; rotate logs up to 5 files
global:log_file_max_files=5
; status file providing an overview of ptpd's operation and statistics
global:log_status=y
; required if ip_mode is set to hybrid
;ptpengine:log_delayreq_interval=0
; uncomment this to log a timing log like in previous ptpd versions
global:statistics_file=/var/log/ptpd2.stats
; on multi-core systems it is recommended to bind ptpd to a single core
global:cpuaffinity_cpucore=0
; use DSCP 46 for expedited forwarding over ipv4 networks
ptpengine:ip_dscp=46
clock:step_startup=y
clock:step_startup_force=y
clock:set_rtc_on_step=y
clock:max_offset_ppm=1000
global:log_level=LOG_ALL
; always keep a new line in the end
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment